体积电阻率测试仪的操作步骤
参数资料parameters
1、电阻测量范围/ Resistance measuring range: 104Ω ~1×1016Ω
电 阻 率/ Resistivity: 104 ~ 2.0×1016 Ω-m;
2、液晶显示: 电阻率、压强、温度、电导率、电流电压、可输入测试样品数据(圆柱:直径,高度;方体:长*宽*高)单位可以切换(mm、cm、m)
LCD: resistivity. pressure. temperature. conductivity. current voltage. input test sample data(cylinder: diameter. height. cube: L * W * H) unit can be switched(mm、cm、m)
3、内置测试电压:0-1000V
Built in test voltage: 0-1000V can be set freely.
4、基本准确度accuracy:5%
5、使用环境: 温度:0℃~40℃,相对湿度<80%
environment: temperature:0℃~40℃,relative humidity<80%
6、测试电压: 10/50/100/250/500/1000V
7、供电形式Power supply: AC 220V,50HZ,功耗约5W
8、测量模式:手动/自动量程。带PC测试软件(选购),USB通讯接口,软件界面同步显示、分析、保存和打印数据!
Measuring mode: manual / automatic range. With PC test software (optional). USB communication interface. synchronous display of software interface. analyze. save and print data.
9、常用电极(夹具)装置有(选购):
A型:固体状三环电极装置;B型:粉末状加压装置 C型:棒状测量电极装置
Commonly used electrode (fixture) device (optional):
Type A: solid three-ring electrode device. Type B: powder pressurized device. Type C: rod-shaped measuring electrode device.
配套方案:解决各材料状态 --固态、液态、气态、颗粒状 电阻、电阻率、电导率测量
体积电阻率测试仪的操作步骤