主要特点Main Features
Used in Lab as material sintering furnace, annealing furnace, smelting furnace, dental furnace, etc.
可作为实验室材料烧结炉、退火炉、熔炼炉、齿科炉等使用
It is possible to add a vent to be used as Nitrogen protection furnace, Argon protection furnace, Oxidizing furnace, Carbonizing furnace.
也可加装通气口，作为氮气保护炉，氧化炉，炭化炉使用
A general necessary electric furnace for experiment in Lab.
实验室必备的一款通用型实验电炉
技术参数Technical Parameters
视频展示 | |
Power 输入电源 | Power rated: 2.5KW (220V) 额定功率：2.5KW (220V) |
Voltage 电压 | Voltage rated: AC 220V 50/60HZ 额定电压：AC 220V 50/60HZ |
Furnace Construction 炉子结构
| High purity fibrous alumina insulation for maximum energy saving - 30% less power consumption than other brands 采用高纯氧化铝作为炉膛材料，**程度减小能量损失，比一般加热炉减少30%能耗。 Double air cooling structure to control furnace surface Temp. no more than 60℃ when furnace is heated into max. Temp. 炉体采用双层结构，中间设置风道，保证炉体表面温度和电气控制部分温度不超过60℃。 The spring door buckle is used to solve the contraction gap caused by high temperature in the chamber of the equipment. 采用弹簧门扣，很好的解决了设备内膛因高温产生的收缩缝隙。 Equipped with inspection window on the front,convenient to to observe the situation inside the chamber 前门设有观察窗，便于观察腔体内部情形 |
Working Temperature 工作温度
| Max. Temperature: 1200℃( 1 hr) **温度：1200℃ (1小时) Continuous working temperature: ≤1000℃ 持续工作温度：≤1000℃ Recommended Heating Rate: 5-40℃/min 推荐升温速率：5-40℃/分钟 |
Max. heating rate **升温速率 | 80℃/min 80℃/分 |
Temperature Controll 控温方式 | PID automatic control and auto-tune function. 模糊PID控制和自整定调节 30 programmable segments for precise thermal processing. 智能化30段可编程控制 Built-in protection for the over-heated and broken thermocouple. 超温和断偶报警功能 |
Thermocouple 热电偶 | K type K型 |
Heating Elements 加热元件 | Fe-Cr-Al Alloy doped by Mo 电阻丝（掺钼铁铬铝合金） |
Temperature Accuracy 控温精度 | +/- 1℃ |
Dimensions 尺寸
| Chamber size(L*D*H): 200*300*120mm (7.2L) 腔体尺寸(长*深*高)：200*300*120mm (7.2L) Furnace size(L*W*H): 440*510*520mm 炉子尺寸(长*宽*高)：440*510*520mm |
Net Weight 净重 | 52kg |
Packing dimensions(L*W*H) 包装尺寸(长*宽*高) | 610*500*720mm（wooden case） 610*500*720mm（木箱） |
Shipping weight 毛重 | 67kg |
Warranty 质保 | One year limited warranty with lifetime support (Such consumable parts as resistance wire are NOT supported by the warranty) 一年质保终身支持（消耗品如电阻丝不在质保范围内） |
Attention 警示 | The equipment is not sealed, and can not be put into toxic, harmful, inflammable and explosive gas. Can add the inlet port to pass through the inert gas or oxygen. 此设备腔体不密封，不能通入有毒有害，易燃易爆气体。可以加装进气接头，通惰性气体或者氧气 Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence and the cracks may be repaired with alumina coating. 在使用过程中炉膛表面可能出现细小裂纹。这是正常情况，裂纹可以用氧化铝涂层修复。 You shall place the sample in to a crucible. Never place sample on the chamber bottom directly. 建议将样品放进坩埚里。不要把样品直接放在腔底。 |
Compliance 认证 | CE Certified CE认证 The furnace is ready to pass TUV(UL61010) or CSA certification at extra cost. 可付费进行TUV(UL61010)或CSA认 |
标准配置 | 高温手套 坩埚钳 垫砖 电源线 |
手机粉体网
发求购
发供应
