TD型斗式提升机采用橡胶带牵引构件,具有规格多、输送量大、提升高度高、运行平稳、寿命长等优点。被输送物料温度一般不得大于60℃,如果采用耐热胶带，则被输送物料的温度可达150℃，适宜输送无（或小）磨琢性的散状物料，不适于输送大块的、高磨琢性及掏取阻力大的物料。
TD型斗提机备有四种料斗：Q型（浅斗）、H型（弧底斗）、Zd型（中深斗）、Sd型（深斗）
TD-bucket conveyer with the use of rubber traction components, it has
many specifications, huge conveying capacity, high degree of upgrading,
stable, long-life and other advantages. Delivered materials temperature
in general does not exceed 60 ℃.If using heat-resistant tape, the
temperature of delivered materials can reach up to 150 ℃.It is suitable
for delivery no(or small) grinding bulk materials ,but unsuitable for
transporting large, High-grinding materials and materials having a big
resistance of drawing out.
TD- bucket conveyer equipped with four hopper: Q-(shallow bucket),
H-(arc at the end of bucket), Zd-(medium deep bucket), Sd-(deep bucket)
主要型号及技术参数:
MAIN MODELS AND TECHNICAL PARAMETERS:
提升机型号 |
TD100 |
TD160 |
TD250 |
TD315 |
TD400 |
TD500 |
TD630 |
||||||||||||||||||||
|
料斗型式Chute type |
Q |
H |
Q |
H |
Zd |
Sd |
Q |
H |
Zd |
Sd |
Q |
H |
Zd |
Sd |
Q |
H |
Zd |
Sd |
Q |
H |
Zd |
Sd |
H |
Zd |
Sd |
||
|
输送量Conveying capacity |
m3/h |
4 |
7.6 |
9 |
16 |
16 |
27 |
20 |
36 |
38 |
59 |
28 |
50 |
42 |
67 |
40 |
76 |
68 |
110 |
63 |
116 |
96 |
154 |
142 |
148 |
238 |
|
|
料斗Chute |
斗容Volume |
L |
0.15 |
0.3 |
0.49 |
0.9 |
1.12 |
1.9 |
1.22 |
2.24 |
3.0 |
4.6 |
1.95 |
3.55 |
3.75 |
5.8 |
3.1 |
5.6 |
5.9 |
9.4 |
4.84 |
9.0 |
9.3 |
14.9 |
14 |
14.6 |
23.5 |
|
斗距Buckets pitch |
mm |
200 |
280 |
350 |
360 |
450 |
400 |
500 |
480 |
560 |
500 |
625 |
710 |
||||||||||||||
|
传动滚筒直径Geared drum diameter |
mm |
400 |
500 |
630 |
800 |
||||||||||||||||||||||
|
从动滚筒直径Return drum diameter |
mm |
315 |
400 |
500 |
630 |
||||||||||||||||||||||
|
料斗运行速度Running speed of chute |
mm/s |
1.4 |
1.6 |
1.8 |
2.0 |
||||||||||||||||||||||
|
传动滚筒转速Geared drum rev |
r/min |
67 |
61 |
55 |
48 |
||||||||||||||||||||||
TH型斗式提升机采用环形链作牵引构件,具有规格多、输送量大、提升高度高、运行平稳、寿命长等优点。被输送物料温度一般不超过250℃，适宜输送松散密度ρ＜1.5t/m3的粉状、粒状、小块状的无磨琢、半磨琢性物料。
TH-bucket elevator with the use of rubber components of traction, with
specifications, throughput, a high degree of upgrading, stable,
long-life advantages.Temperature materials were delivered less than 250
℃, suitable for transmission loose density ρ <1.5t/m3 the powdered,
granular, massive Non-small mill cut, cut a half-mill material.
主要型号及技术参数:
MAIN MODELS AND TECHNICAL PARAMETERS:
斗式提升机型号Bucket conveyer type | TH315 | TH400 | TH500 | TH630 | |||||
料斗型式Chute type | Zh | Sh | Zh | Sh | Zh | Sh | Zh | Sh | |
输送量(m3/h) Conveying capacity | 35 | 59 | 58 | 94 | 73 | 118 | 114 | 185 | |
料斗Chute | 斗容Volume (L) | 3.75 | 6 | 5.9 | 9.5 | 9.3 | 15 | 14.6 | 23.6 |
斗距Buckets pitch (mm) | 512 | 688 | |||||||
链条Chain | 圆钢直径节距Rounds diameter pitch (mm) | Φ18×64 | Φ22×86 | ||||||
单条破断强度Tensile strength of one chain (KN) | ≥320 | ≥480 | |||||||
单位长度牵引件重量Unit weight of pull part (kg/m) | 25.64 | 26.58 | 31.0 | 31.9 | |||||
料斗运行速度Running speed of chute (m/s) | 1.4 | 1.5 | |||||||
传动链轮转速Drive sprocket wheel vet (r/min) | 42.5 | 37.6 | 35.8 | 31.8 | |||||
输送物料**块度Maximum lump size | 35 | 40 | 50 | 60 | |||||
向前
手机粉体网
发求购
发供应
